PER-FFPR-1
FillFast Replacement Filters are designed for the FillFast Professional Pre-Fill System.
Each replacement comes with (2) Carbon Filter Cartridges and (2) CuLator Metal Eliminator Filter Cartridges for a total of four filters.
Each Carbon Filter Cartridge is designed to last for 10,000 -20,000 gallons. Each CuLator Metal Eliminator Filter Cartridge will remove stain-causing metal ions for up to 10,000 – 20,000 gallons of swimming pool fill water even if the quality of water is not the best.
If you are using the FillFast to fill your pool or spa with well water, make sure your well water is safe for drinking and is potable water. Do not use the FillFast system on water which is not potable. You must use the provided venturi when filling or topping off the pool with well water. Using the venturi will decrease flow rate. Using well water may require additional Carbon Filters. If you have high levels of sediment, pre-filter with a 20-30 micron pleated filter to remove the sediment BEFORE FillFast.
If the flow rate is significantly decreased during filling, rinse or change the Carbon Filter Cartridge per instructions.
- Removes up to 16 ppm dissolved metals from 20,000 gallons (or 32 ppm metals from 10,000 gallons)
- Prevents swimming pool staining by removing and eliminating metals from fill water
- Reduces sediment, odors, and combined chlorine
- Easy to use
- Flow rates (6-8 GPM)
- Patented
- Made in the USA
Clay Hunt (verified owner) –
ken –
I was skeptical at first, but after extensive tests this does what it says. If you pre test and have high metal content slow the fill down or put 2 sets end to end. Tons of ways to configure the culator cartridges to be sure you have no metals on fill.
Michael (verified owner) –
The product was shipped out just fine; no issues there. However, a question that I submitted through the website about a week ago about one of their products remains unaddressed…