CuLator InLine Pro-With CuLator Metal Eliminator Filter

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

Available to Authorized Dealers and Professionals Only

CALL 954-764-7654 For Pricing and to Order!

Make owning a pool easy with CuLator InLine Pro!

CuLator InLine Pro uses an advanced pleated CuLator filter to remove and eliminate 8 ppm dissolved metals from pool and spa water.  The CuLator filter removes copper, iron, manganese and lead!  CuLator InLine Pro prevents staining and water discoloration and works fast!

  • Works continuously to remove stain-causing metals like iron, copper, and manganese
  • Prevents pool surface staining and water discoloration
  • No rinsing
  • No pressure build up
  • Removes 8 ppm metals from 20,000 gallons
  • Easy installation and easy filter replacement
  • Changes color for easy identification

CuLator Color Chart




CuLator InLine Pro is the only way to remove ionized stain-causing metals from pool and spa water.  Each CuLator Filter captures and removes up to 8 ppm dissolved metals from swimming pool water.


CuLator InLine Pro is available only through authorized dealers and swimming pool professionals.  Please call 954-764-7654 with any questions and for pricing.  CuLator InLine Pro is plumbed into the pool’s circulation system between the pump and the filter.

CuLator InLIne Pro

CuLator InLine Pro Metal Eliminator Filter System

CuLator InLine Pro was developed after years of research to add the power of CuLator to filter media and create pleated filters which remove metal ions from water!  CuLator InLine Pro is easy to install and the filters are easy to replace.  No other filter can remove metals from water in the ionic form…the form which you can’t see, but causes stains and water discoloration.  Using a clear housing, the InLine Pro allows you to see what metals are being bound inside the filter:

CuLator Color Chart

The CuLator InLine Pro removes and eliminates up to 8 ppm total dissolved metals from 20,000 gallons of water.  The length of time before changing filters depends on the amount of metal in the water and the amount of metal you are adding.  In most general use cases, the filter should last 6 months or longer.  If you have a lot of metal, or are on a well, then you may have to change every 3-4 months.  CuLator InLine Pro is also designed to work faster than other CuLator products because the filter has more surface area for the metal binding polymers to grab the metals out of the water.  CuLator Filters remove and capture stain-causing metals like iron (rust), copper, manganese, cobalt, and lead!

CuLator InLine Pro should be installed by a pool and spa professional.

Used CuLator Filter With Iron Removed from Swimming Pool Water


Used CuLator Filter With Copper Removed from Swimming Pool Water
Detail of Used CuLator Filter with Cobalt Captured and Removed from Swimming Pool Water


Please follow and like us:

Additional information

Weight 5 lbs
Dimensions 12 x 12 x 6 in

1 review for CuLator InLine Pro-With CuLator Metal Eliminator Filter

  1. Rated 5 out of 5

    Carrie Hamilton

    I’ve been using CuLator for years because I’m on well water and was getting rust stains in my pool. I asked my pool guy to install CuLator InLine Pro as soon as it became available. So far, so good. No stains in my pool and the filter is easy to replace. Thanks for a great new product!

    • David

      Hi Carrie,

      Thanks for the review! We have been working hard on the CuLator InLine Pro for a long time! The CuLator pleated filter is a breakthrough technology that allows us to use our CuLator (Chelok) polymers in a wider range of products. Also being introduced is our FILLFAST High-Flow Pre-Fill Dual Filter System which removes up to 16 ppm dissolved metals from 10,000 gallons of swimming pool fill water!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…